#Lighter fluid refill how to

Or, if you have a good-fitting rubber grommet, that can work too. Cut a tiny hole in the rubber band with your pin and insert the valve into it. In a pinch, a large rubber band would suffice. As a result, you’ll need to add something to the valve to provide a proper seal.

Step 3:īutane would spill everywhere if you simply pressed the butane canister valve into the hole you created. To do this, simply unscrew and remove the screw from the lighter base itself – some fluid may come out while doing so that must be discarded before refilling with new gas later on.Īfter draining any remaining fuel, attempt a test light by pressing down on its lever: if no flame appears or it is weak at best, then you know your Bic Lighter needs more liquid in order for it to work properly again. You’ll want to check if there is still any butane left in the lighter before refilling with new gas – while many refillable lighters may give off a slight odor of butane, it’s always wise to take the precaution anyway. This lets you know that the seal has been broken, allowing any lighter fluid to pass through this opening again. To get past this obstacle, simply insert your pin and push it in until you can feel the ball inside trembling. This is necessary if you want to properly refill it with butane gas, as a ball seals off this opening and prevents any lighter fluid from coming out or going in. Insert your pin into the small hole at the base of the Bic lighter. This method is more straightforward but can get messy.

#Lighter fluid refill how to

Pliers and Filer(Recommended Not Required) How to Refill the Bic Lighter.

Knowing how to refill a disposable lighter, on the other hand, is a useful survival ability and just good to know.Īnd of course, a word of warning, you are playing with fire here, so please refill the butane lighter at your own risk. In terms of butane lighters, I personally like the UST Floating Lighter (Amazon Link). Many are inexpensive and perform as well as (if not better than) a Bic lighter. If you use lighters excessively and need to replace them, you should consider purchasing a refillable lighter. Once you have gathered all these essential items, you’re ready to refill your BIC lighter.

Why is my butane lighter not working after refill?īIC lighters are refillable, but you will need to carefully follow some steps and have a few basic things on hand like a thumbtack, rubberband, pliers, a drill, drill bits, and a fuel refill valve.

Are you supposed to shake butane before filling?.Can you put butane back in the canister?.This is highly explosive and therefore extremely dangerous to use as a lighter fluid. PLEASE NOTE: some fluids marked as “white gas” are actually additive-free gasoline. Other naphtha type fuels have application specific additives and may be extremely toxic. It’s possible to use non-branded forms of white gas/naphtha fluid in a lighter but I can’t recommend using anything other than “lighter fluid”. This is easier than attempting to transfer the fluid itself as that is a complicated process resulting in losing a lot of the fluid anyway. If you have another Zippo lighter with the correct fluid in it I would recommend transferring the insert. Zippo lighters do not have this tight of a seal (even when upgraded with rubber or silicone gaskets). BIC, and most other encased plastic lighters, use butane type fuel.īutane has to stay in a tightly sealed container or it will evaporate within a few minutes. Zippo uses a white gas/naphtha type fuel. Howdy Trinity - it’s possible, but unlikely, that would work.